Filterdyne |
Mini-Vac 858-300-875 |
||
| Filter Vessels | Oil Purification Systems | Central Lubricating Systems | Home |
| Filtration Systems | Filtration and Separation Systems | ||
| Mini-Vac®
purification systems are compact, fully automatic systems for removing
water, gases, and solid contamination from hydraulic, lubricating, mineral
or synthetic, and phosphate ester oils. These systems handle 300 GPH,
remove silt and particulate down to 5 micron, and reach an ultimate
dryness of 70 ppm total water, and will remove air and other gases.
Each system comes with circuit breakers and fuses on all contactors and motor starters, a durable vacuum ring pump, and carbon steel construction with urethane interior finish. All Mini-Vacs® meet National Electric Code guidelines. |
![]() |
|
| System Specifications: | |
| Weight | 500 lbs. |
| Dimensions | 25" wide x 32" long x 62" high |
| Flow Rate | 300 GPH |
| Operating Vacuum | Up to 28" hg |
| Process Operating Temperature | Up to 180 F |
| Particulate Removal | 5 micron standard (1 micron available) |
| Inlet/Outlet Hose | 10 feet of each. One inch B |
| Hose End Fittings | Quick disconnect at machine |
| Discharge Pump Motor | 1HP |
| Heater Power | 7.5 KW |
| Power Requirements | 480 volt/3 phase/15 amp 575 volt available |
| Operating Discharge Pressure | Up to 50 PSI |
| Mini-Vac® Options (for all Mini-Vac Models) | |||
| Part Number | |||
| 128-322 | 7.5 KW Additional Heat may add total heat of 15 KW | ||
| BV-81-290 BV-81SS0291 | Inlet Basket Vessel Carbon Steel 304 Stainless Steel | ||
| 180-923 | Seal Water Cooling System Eliminates need for continuous water supply but reduces water removal rate. | ||
| 180-924 | NEMA 4X Service Includes stainless steel electrical box, cast iron motors, and solenoid shut off valve. | ||
| 180-925 | Dyna-Dry Vacuum Chamber 304 stainless steel | ||
| 180-926 | Post filter in stainless steel 304 stainless steel | ||
| 129-341 | Semi-Pneumatic Wheels - Rigid one each six inch diameter | ||
| 129-164 | Semi-Pneumatic Wheels - Swivel One each six inch diameter | ||
| 180-927 | Trailer with Loading Ramp | ||
| 128-580 | Explosion Proof Design Class 1, Division II, Group A-G | ||
|
|
||
| Request Information | Home | Contact Us |
|
Visit our other sites: jbsystemsusa.com
|
||